• Fallout 4 Find Companions
• Fallout 4 Find Power Armor

Introduction When an application crashes, a crash report is created and stored on the device. Crash reports describe the conditions under which the application terminated, in most cases including a complete backtrace for each executing thread, and are typically very useful for debugging issues in the application. You should look at these crash reports to understand what crashes your application is having, and then try to fix them.

Crash reports with backtraces need to be symbolicated before they can be analyzed. Symbolication replaces memory addresses with human-readable function names and line numbers. If you get crash logs off a device through Xcode's Devices window, then they will be symbolicated for you automatically after a few seconds. Otherwise you will need to symbolicate the.crash file yourself by importing it to the Xcode Devices window. See for details. A Low Memory report differs from other crash reports in that there are no backtraces in this type of report. When a low memory crash happens, you must investigate your memory usage patterns and your responses to low memory warnings.

How can I downgrade Xcode? Where can I set my iOS SDK Locations? Where can I find the.dSYM file to symbolicate iOS crash logs? PDF for offline.

Automatically save the dSYM files. Is that the dSYM file must match the binary exactly. (specifically ~/Library/Developer/Xcode/Archives/ /. When you build an archive with Xcode you use (by default) the 'release' configuration which will not build the DSYM as it is debugging information.

This document points to you several memory management references that you might find useful. Note: Crash reports from macOS are typically symbolicated, or partially symbolicated, at the time they are generated. This section focuses on symbolicating crash reports from iOS, watchOS, and tvOS, but the overall process is similar for macOS. Figure 1 Overview of the crash reporting and symbolication process.

As the compiler translates your source code into machine code, it also generates debug symbols which map each machine instruction in the compiled binary back to the line of source code from which it originated. Depending on the Debug Information Format ( DEBUGINFORMATIONFORMAT) build setting, these debug symbols are stored inside the binary or in a companion Debug Symbol ( dSYM) file. By default, debug builds of an application store the debug symbols inside the compiled binary while release builds of an application store the debug symbols in a companion dSYM file to reduce the binary size. The Debug Symbol file and application binary are tied together on a per-build-basis by the build UUID.

A new UUID is generated for each build of your application and uniquely identifies that build. Even if a functionally-identical executable is rebuilt from the same source code, with the same compiler settings, it will have a different build UUID.

Debug Symbol files from subsequent builds, even from the same source files, will not interoperate with binaries from other builds. When you archive the application for distribution, Xcode will gather the application binary along with the.

DSYM file and store them at a location inside your home folder. You can find all of your archived applications in the Xcode Organizer under the 'Archived' section. For more information about creating an archive, refer to the. Important: To symbolicate crash reports from testers, app review, and customers, you must retain the archive for each build of your application that you distribute. If you are distributing your app via the App Store, or conducting a beta test using Test Flight, you will be given the option of including the dSYM file when uploading your archive to iTunes Connect.

In the submission dialog, check “Include app symbols for your application”. Uploading your dSYM file is necessary to receive crash reports collected from TestFlight users and customers who have opted to share diagnostic data. For more information about the crash reporting service, refer to the. Important: Crash reports received from App Review will be unsymbolicated, even if you included the dSYM file when uploading your archive to iTunes Connect. You will need to symbolicate any crash reports received from App Review using Xcode.

When your application crashes, an unsymbolicated crash report is created and stored on the device. Users can retrieve crash reports directly from their device by following the steps in. If you have distributed your application via AdHoc or Enterprise distribution, this is the only way to acquire crash reports from your users. Crash reports retrieved from a device are unsymbolicated and will need to be symbolicated using Xcode.

Xcode uses the dSYM file associated with your application binary to replace each address in the backtrace with its originating location in your source code. The result is a symbolicated crash report. If the user has opted to share diagnostic data with Apple, or if the user has installed a beta version of your application through TestFlight, the crash report is uploaded to the App Store. The App Store symbolicates the crash report and groups it with similar crash reports.

This aggregate of similar crash reports is called a Crash Point. The symbolicated crash reports are made available to you in Xcode's Crashes organizer. Bitcode Bitcode is an intermediate representation of a compiled program. When you archive an application with bitcode enabled, the compiler produces binaries containing bitcode rather than machine code. Once the binary has been uploaded to the App Store, the bitcode is compiled down to machine code. The App Store may compile the bitcode again in the future, to take advantage of future compiler improvements without any action on your part.

Figure 2 Overview of the Bitcode compilation process. Because the final compilation of your binary occurs on the App Store, your Mac will not contain the debug symbol ( dSYM) files needed to symbolicate crash reports received from App Review or from users who have sent you crash reports from their devices. Although a dSYM file is produced when you archive your application, it is for the bitcode binary and can not be used to symbolicate crash reports. The App Store makes the dSYM files generated during bitcode compilation available for you to download, from Xcode or from the iTunes Connect website. You must download these dSYM files in order to symbolicate crash reports received from App Review or from users who have sent you crash reports from their devices.

Crash reports received through the crash reporting service will be symbolicated automatically. Important: The binary compiled by the App Store will have different UUIDs than the binary that was originally submitted. Downloading the dSYM files from Xcode. In the Archives organizer, select the archive that you originally submitted to the App Store. Click the Download dSYMs button. Xcode downloads the dSYM files and inserts them into the selected archive.

Downloading the dSYM files from the iTunes Connect website. Open the App Details page.

Click Activity. From the list of All Builds, select a version. Click the Download dSYM link. Translating 'hidden' symbol names back to their original names When you upload your app with bitcode to the App Store, you may choose not to send your application's symbols by unchecking the 'Upload your app's symbols to receive symbolicated reports from Apple' box in the submission dialog. If you choose not to send your app's symbol information to Apple, Xcode will replace the symbols in your app's. DSYM files with obfuscated symbols such as 'hidden#109' before sending your app to iTunes Connect. Xcode creates a mapping between the original symbols and the 'hidden' symbols and stores this mapping in a.bcsymbolmap file inside the application archive.

DSYM file will have a corresponding.bcsymbolmap file. Before symbolicating crash reports, you will need to de-obfuscate the symbols in the.

DSYM files downloaded from iTunes Connect. If you use the Download dSYMs button in Xcode, this de-obfuscation will be performed automatically for you. However, if you use the iTunes Connect website to download the. DSYM files, open Terminal and use the following command to de-obfuscate your symbols (replacing the example paths with your own archive and the dSYMs folder downloaded from iTunes Connect).

Xcrun dsymutil -symbol-map /Library/Developer/Xcode/Archives/2017-11-23/MyGreatApp 11-23-17, 12.00 PM.xcarchive/BCSymbolMaps /Downloads/dSYMs/3B15C133-88AA-35B0-B8BA-84AF76826CE0.dSYM Run this command for each. DSYM file inside the dSYMs folder you downloaded. Determining Whether a Crash Report is Symbolicated A crash report may be unsymbolicated, fully symbolicated, or partially symbolicated.

Unsymbolicated crash reports will not contain the method or function names in the backtrace. Instead, you have hexadecimal addresses of executable code within the loaded binary images. In a fully symbolicated crash report, the hexadecimal addresses in every line of the backtrace are replaced with the corresponding symbol.

In a partially symbolicated crash report, only some of the addresses in the backtrace have been replaced with their corresponding symbols. Obviously, you should try to fully symbolicate any crash report you receive as it will provide the most insight about the crash. A partially symbolicated crash report may contain enough information to understand the crash, depending upon the type of crash and which parts of the backtraces were successfully symbolicated. An unsymbolicated crash report is rarely useful.

Figure 3 The same backtrace at various levels of symbolication. Symbolicating iOS Crash Reports With Xcode Xcode will automatically attempt to symbolicate all crash reports that it encounters. All you need to do for symbolication is to add the crash report to the Xcode Organizer. Note: Xcode will not accept crash reports without a.crash extension.

If you have received a crash report without an extension, or with a.txt extension, rename it to have a.crash extension before following the steps listed below. Connect an iOS device to your Mac. Choose 'Devices' from the 'Window' menu. Under the 'DEVICES' section in the left column, choose a device. Click the 'View Device Logs' button under the 'Device Information' section on the right hand panel.

Drag your crash report onto the left column of the presented panel. Xcode will automatically symbolicate the crash report and display the results To symbolicate a crash report, Xcode needs to be able to locate the following:. The crashing application's binary and dSYM file. The binaries and dSYM files for all custom frameworks that the application links against. For frameworks that were built from source with the application, their dSYM files are copied into the archive alongside the application's dSYM file.

For frameworks that were built by a third-party, you will need to ask the author for the dSYM file. Symbols for the OS that the that application was running on when it crashed. These symbols contain debug information for the frameworks included in a specific OS release (e.g. OS symbols are architecture specific - a release of iOS for 64-bit devices won't include armv7 symbols. Xcode will automatically copy OS symbols from each device that you connect to your Mac.

If any of these are missing Xcode may not be able to symbolicate the crash report, or may only partially symbolicate the crash report. Symbolicating Crash Reports With atos The command converts numeric addresses to their symbolic equivalents. If full debug symbol information is available then the output of atos will include file name and source line number information. The atos command can be used to symbolicate individual addresses in the backtrace of an unsymbolicated, or partially symbolicated, crash report.

To symbolicate a part of a crash report using atos:. Find a line in the backtrace which you want to symbolicate. Note the name of the binary image in the second column, and the address in the third column. Look for a binary image with that name in the list of binary images at the bottom of the crash report. Note the architecture and load address of the binary image. Figure 4 Information from the crash report that is needed to use atos. Locate the dSYM file for the binary.

You can use Spotlight to find the matching dSYM file for the UUID of the binary image. See the section. DSYM files are bundles in which reside a file containing the DWARF debugging information generated by the compiler at build time. You must provide the path to this file, not to the dSYM bundle, when invoking atos. With the above information you can symbolicate addresses in the backtrace using the atos command. You can specify multiple addresses to symbolicate, separated by a space.

Atos -arch -o /Contents/Resources/DWARF/ -l Listing 1 Example usage of the atos command following the steps above, and the resulting output. $ atos -arch arm64 -o TheElements.app.dSYM/Contents/Resources/DWARF/TheElements -l 0x1000e4000 0x0effdc -AtomicElementViewController myTransitionDidStop:finished:context: Symbolication Troubleshooting If Xcode is failing to fully symbolicate a crash report, it's likely because your Mac is missing the dSYM file for the application binary, the dSYM files for one or more frameworks the application links against, or the device symbols for the OS the application was running on when it crashed. The steps below show how to use Spotlight to determine whether the dSYM file needed to symbolicate a backtrace addresse within a binary image is present on your Mac. Figure 5 Locating the UUID for a binary image. Find a line in the backtrace which Xcode failed to symbolicate.

Note the name of the binary image in the second column. Look for a binary image with that name in the list of binary images at the bottom of the crash report. This list contains the UUIDs for each of the binary images that were loaded into the process at the time of the crash. Listing 2 You can use the grep command line tool to quickly find the entry in the list of binary images. $ grep -after-context=1000 'Binary Images:' grep.

Convert the UUID of the binary image to a 32 character string seperated in groups of 8-4-4-4-12 ( XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX). Note that all letters must be uppercased. Search for the UUID using the mdfind command line tool using the query 'comapplexcodedsymuuids ' (include the quotation marks).

Listing 3 Using the mdfind command line tool to search for dSYM files with a given UUID. $ mdfind 'comapplexcodedsymuuids '. If Spotlight finds a dSYM file for the UUID, mdfind will print the path to the dSYM file and possibly its containing archive. If a dSYM file for the UUID was not found, mdfind will exit without printing anything. If Spotlight found a dSYM file for the binary but Xcode was not able to symbolicate addresses within that binary image, then you should file a bug. Attach the crash report and the relevant dSYM file(s) to the bug report. As a workaround, you can manually symbolicate the address using atos.

If Spotlight did not find a dSYM for the binary image, verify that you still have the Xcode archive for the version of your application that crashed and that this archive is located somewhere that Spotlight can find it (any location in your home directory should do). If your application was built with bitcode enabled, make sure you have downloaded the dSYM files for the final compilation from the App Store. If you think that you have the correct dSYM for the binary image, you can use the dwarfdump command to print the matching UUIDs. You can also use the dwarfdump command to print the UUIDs of a binary. Xcrun dwarfdump -uuid. Note: You must have the archive that you originally submitted to the App Store for the version of your application that is crashing. The dSYM file and application binary are specifically tied together on a per-build-basis.

Creating a new archive, even from the same sources and build configuration, will not produce a dSYM file that can interoperate with the crashing build. If you no longer have this archive, you should submit a new version of your application for which you retain the archive. You will then be able to symbolicate crash reports for this new version.

Exception Type: EXCBADACCESS (SIGSEGV) Exception Subtype: KERNINVALIDADDRESS at 0x000000 Termination Signal: Segmentation fault: 11 Termination Reason: Namespace SIGNAL, Code 0xb Terminating Process: exc handler 0 Triggered by Thread: 0 An explanation of the fields that may appear in this section are presented below. Exception Codes: Processor specific information about the exception encoded into one or more 64-bit hexadecimal numbers. Typically, this field will not be present because the Crash Reporter parses the exception codes to present them as a human-readable description in the other fields. Exception Subtype: The human-readable name of the exception codes.

Exception Message: Additional human-readable information extracted from the exception codes. Exception Note: Additional information that is not specific to one exception type. If this field contains SIMULATED (this is NOT a crash) then the process did not crash, but was killed at the request of the system, typically the watchdog. Termination Reason: Exit reason information specified when a process is terminated. Key system components, both inside and outside of a process, will terminate the process upon encountering a fatal error (e.g.

A bad code signature, a missing dependent library, or accessing privacy sensitive information without the proper entitlement). MacOS Sierra, iOS 10, watchOS 3, and tvOS 10 have adopted new infrastructure to record these errors, and crash reports generated by these operating systems list the error messages in the Termination Reason field. Triggered by Thread: The thread on which the exception originated. The following sections explain some of the most common exception types: Bad Memory Access EXCBADACCESS // SIGSEGV // SIGBUS The process attempted to access invalid memory, or it attempted to access memory in a manner not allowed by the memory's protection level (e.g. Writing to read-only memory). The Exception Subtype field contains a kernreturnt describing error and the address of the memory that was incorrectly accessed. Here are some tips for debugging a bad memory access crash:.

If objcmsgSend or objcrelease are near the top of the for the crashed thread, the process may have attempted to message a deallocated object. You should profile the application with the to better understand the conditions of this crash. If gpusReturnNotPermittedKillClient is near the top of the for the crashed thread, the process was killed because it attempted to do rendering with OpenGL ES or Metal while in the background.

Run your application with the enabled. The address sanitizer adds additional instrumentation around memory access in your compiled code.

As your application runs, Xcode will alert you if memory is accessed in a way that could lead to a crash. Abnormal Exit EXCCRASH // SIGABRT The process exited abnormally. The most common causes of crashes with this exception type are uncaught Objective-C/C exceptions and calls to abort. App Extensions will be terminated with this exception type if they take too much time to initialize (a watchdog termination). If an extension is killed due to a hang at launch, the Exception Subtype of the generated crash report will be LAUNCHHANG.

Because extensions do not have a main function, any time spent initializing occurs within static constructors and +load methods present in your extension and dependent libraries. You should defer as much of this work as possible.

Trace Trap EXCBREAKPOINT // SIGTRAP Similar to an Abnormal Exit, this exception is intended to give an attached debugger the chance to interrupt the process at a specific point in its execution. You can trigger this exception from your own code using the builtintrap function. If no debugger is attached, the process is terminated and a crash report is generated. Lower-level libraries (e.g.

Libdispatch) will trap the process upon encountering a fatal error. Additional information about the error can be found in the section of the crash report, or in the device's console. Swift code will terminate with this exception type if an unexpected condition is encountered at runtime such as:.

a non-optional type with a nil value. a failed forced type conversion Look at the to determine where the unexpected condition was encountered. Additional information may have also been logged to the device's console. You should modify the code at the crashing location to gracefully handle the runtime failure.

For example, use instead of force unwrapping an optional. Illegal Instruction EXCBADINSTRUCTION // SIGILL The process attempted to execute an illegal or undefined instruction. The process may have attempted to jump to an invalid address via a misconfigured function pointer. On Intel processors, the ud2 opcode causes an EXCBADINSTRUCTION exception but is commonly used to trap the process for debugging purposes. Swift code on Intel processors will terminate with this exception type if an unexpected condition is encountered at runtime. See Trace Trap for details.

Quit SIGQUIT The process was terminated at the request of another process with privileges to manage its lifetime. SIGQUIT does not mean that the process crashed, but it did likely misbehave in a detectable manner. On iOS, keyboard extensions will be quit by the host app if they take too long to load.

It's unlikely that the shown in the crash report will point to the responsible code. Most likely, some other code along the startup path for the extension has taken a long time to complete but finished before the time limit, and execution moved onto the code shown in the when the extension was quit. You should the extension to better understand where most of the work during startup is occurring, and move that work to a background thread or defer it until later (after the extension has loaded).

Killed SIGKILL The process was terminated at the request of the system. Look at the Termination Reason field to better understand the cause of the termination.

The Termination Reason field will contain a namespace followed by a code. The following codes are specific to watchOS:. The termination code 0xc51bad01 indicates that a watch app was terminated because it used too much CPU time while performing a background task. To address this issue, optimize the code performing the background task to be more CPU efficient, or decrease the amount of work that the app performs while running in the background. The termination code 0xc51bad02 indicates that a watch app was terminated because it failed to complete a background task within the allocated time. To address this issue, decrease the amount of work that the app performs while running in the background. The termination code 0xc51bad03 indicates that a watch app failed to complete a background task within the allocated time, and the system was sufficiently busy overall that the app may not have received much CPU time with which to perform the background task.

Although an app may be able to avoid the issue by reducing the amount of work it performs in the background task, 0xc51bad03 does not indicate that the app did anything wrong. More likely, the app wasn’t able to complete its work because of overall system load. Guarded Resource Violation EXCGUARD The process violated a guarded resource protection. System libraries may mark certain file descriptors as guarded, after which normal operations on those descriptors will trigger an EXCGUARD exception (when it wants to operate on these file descriptors, the system uses special 'guarded' private APIs).

This helps you quickly track down issues such as closing a file descriptor that had been opened by a system library. For example, if an app closes the file descriptor used to access the SQLite file backing a Core Data store, Core Data would then crash mysteriously much later on. The guard exception gets these problems noticed sooner, and thus makes them easier to debug. Crash reports from newer versions of iOS include human-readable details about the operation that caused the EXCGUARD exception in the Exception Subtype and Exception Message fields. In crash reports from macOS or older versions of iOS, this information is encoded into the first Exception Code as a bitfield which breaks down as follows:. 63:61 - Guard Type: The type of the guarded resource. A value of 0x2 indicates the resource is a file descriptor.

60:32 - Flavor: The conditions under which the violation was triggered. If the first (1. Note: Terminating a suspended app using the app switcher does not generate a crash report. Once an app has suspended, it is eligible for termination by iOS at any time, so no crash report will be generated. Additional Diagnostic Information This section includes additional diagnostic information specific to the type of termination, which may include:.

Application Specific Information: framework error messages captured just before the process terminated. Kernel Messages: details about code-signature problems. Dyld Error Messages: error messages emitted by the dynamic linker Starting in macOS Sierra, iOS 10, watchOS 3, and tvOS 10, most of this information is now reported in the Termination Reason field under the. You should read this section to better understand the circumstances under which the process was terminated. Listing 7 Excerpt of the Application Specific Information section from a crash report generated when a process was terminated because a framework it links against could not be found.

Application Specific Information: com.example.apple-samplecode.TheElements failed to scene-create after 19.81s (launch took 0.19s of total time limit 20.00s) Elapsed total CPU time (seconds): 7.690 (user 7.690, system 0.000), 19% CPU Elapsed application CPU time (seconds): 0.697, 2% CPU Backtraces The most interesting part of a crash report is the backtrace for each of the process's threads at the time it terminated. Each of these traces is similar to what you would see when pausing the process with the debugger. Listing 9 Excerpt of the Backtrace section from a fully symbolicated crash report. Note: Messaging a previously deallocated object may raise an NSInvalidArgumentException instead of crashing the program with a memory access violation.

This occurs when a new object is allocated in the memory previously occupied by the deallocated object. If your application is crashing due to an uncaught NSInvalidArgumentException (look for -NSObject(NSObject) doesNotRecognizeSelector: in the exception backtrace), consider profiling your application with the to eliminate the possibility that improper memory management is the cause. If an exception is not caught, it is intercepted by a function called the uncaught exception handler. The default uncaught exception handler logs the exception message to the device's console then terminates the process. Only the exception backtrace is written to the generated crash report under the Last Exception Backtrace section, as shown in Listing 10.

The exception message is omitted from the crash report. If you receive a crash report with a Last Exception Backtrace you should acquire the console logs from the originating device to better understand the conditions which caused the exception.

Listing 10 Excerpt of the Last Exception Backtrace section from an unsymbolicated crash report. Last Exception Backtrace: (0x18eee41c0 0x18d91c55c 0x18eee3e88 0x18f8ea1a0 0x195013fe4 0x1951acf20 0x18ee03dc4 0x1951ab8f4 0x195458128 0x19545fa20 0x19545fc7c 0x19545ff70 0x194de4594 0x194e94e8c 0x194f47d8c 0x194f39b40 0x194ca92ac 0x18ee917dc 0x18ee8f40c 0x18ee8f89c 0x18edbe048 0x19083f198 0x194d21bd0 0x194d1c908 0x1000ad45c 0x18dda05b8) A crash log with a Last Exception Backtrace containing only hexadecimal addresses must be symbolicated to produce a usable backtrace as shown in Listing 11. Listing 11 Excerpt of the Last Exception Backtrace section from a symbolicated crash report. This exception was raised when loading a scene in the app's storyboard. The corresponding IBOutlet for a connection to an element in the scene was missing.

Note: If you find that exceptions thrown within an exception handling domain setup by your application are not being caught, verify that you are not specifying the -nocompactunwind flag when building your application or libraries. 64-bit iOS uses a 'zero-cost' exception implementation. In a 'zero-cost' system, every function has additional data that describes how to unwind the stack if an exception is thrown across the function. If an exception is thrown across a stack frame that has no unwind data then exception handling cannot proceed and the process halts.

There might be an exception handler farther up the stack, but if there is no unwind data for a frame then there is no way to get there from the stack frame where the exception was thrown. Specifying the -nocompactunwind flag means you get no unwind tables for that code, so you can not throw exceptions across those functions. Additionally, if you are including plain C code in your application or a library, you may need to specify the -funwind-tables flag to include unwind tables for all functions in that code. Thread State This section lists the thread state of the crashed thread. This is a list of registers and their values at the time execution halted. Understanding the thread state is not necessary when reading a crash report but you may be able to use this information to better understand the conditions of the crash. Listing 12 Excerpt of the Thread State section from a crash report from an ARM64 device.

Binary Images: 0x100060000 - 0x100073fff TheElements arm64 /var/containers/Bundle/Application/888C1FA2-3666-4AE2-9E8E-62E2F787DEC1/TheElements.app/TheElements. Each line includes the following details for a single binary image:. The binary image's address space within the process. The binary name or bundle identifier of the binary (macOS only). In crash reports from macOS, a (+) is prepended if the binary is part of the OS. (macOS only) The binary's short version string and bundle version, separated by a dash. (iOS only) The architecture of the binary image.

A binary may contain multiple 'slices', one for each architecture it supports. Only one of these slices is loaded into the process. An UUID which uniquely identifies the binary image.

This value changes with each build of the binary and is used to locate the corresponding dSYM file when symbolicating the crash report. The path to the binary on disk. Understanding Low Memory Reports When a low-memory condition is detected, the virtual memory system in iOS relies on the cooperation of applications to release memory. Low-memory notifications are sent to all running applications and processes as a request to free up memory, hoping to reduce the amount of memory in use.

If memory pressure still exists, the system may terminate background processes to ease memory pressure. If enough memory can be freed up, your application will continue to run. If not, your application will be terminated by iOS because there isn't enough memory to satisfy the application's demands, and a low memory report will be generated and stored on the device. The format of a low memory report differs from other crash reports in that there are no backtraces for the application threads. A low memory report begins with a header similar to the of a crash report. Following the header are a collection of fields listing system-wide memory statistics. Take note of the value for the Page Size field.

The memory usage of each process in a low memory report is reported in terms of number of memory pages. The most important part of a low memory report is the table of processes.

This table lists all running processes, including system daemons, at the time the low memory report was generated. If a process was 'jettisoned', the reason will be listed under the reason column. A process may be jettisoned for a number of reasons:.

per-process-limit: The process crossed its system-imposed memory limit. Per-process limits on resident memory are established by the system for all applications. Crossing this limit makes the process eligible for termination. Note: The system avoids killing the frontmost app when vnodes are nearly exhausted.

Fallout 4 Find Companions

This means that your application, when in the background, may be terminated even if it is not the source of excess vnode usage. highwater: A system daemon crossed its high water mark for memory usage. jettisoned: The process was jettisoned for some other reason. If you do not see a reason listed next to your app/extension process, the cause of the crash was not memory pressure. Look for a.crash file (described in the previous section) for more information. When you see a low memory crash, rather than be concerned about what part of your code was executing at the time of termination, you should investigate your memory usage patterns and your responses to low memory warnings. Lists detailed steps on how to use the Leaks Instrument to discover memory leaks, and how to use the Allocations Instrument's Mark Heap feature to avoid abandoned memory.

Discusses the proper ways to respond to low-memory notifications as well as many tips for using memory effectively. It is also recommended that you check out the WWDC 2010 session,. Document Revision History Date Notes 2018-01-08 Added information about de-obfuscating symbols in dSYMs downloaded using the iTunes Connect website.

Also added a description of the exception code 0x2bad45ec. 2017-04-03 Clarified that crash reports need to be named with a.crash extension to be symbolicated using Xcode. Removed the discussion of the 0xdeadfa11 exception code (force quitting an app no longer generates a crash report). 2017-02-21 Added information about some termination codes specific to watchOS apps.

Fallout 4 Find Power Armor

Added information about why keyboard extensions may receive a SIGQUIT signal. 2017-01-03 Added additional details and resolution suggestions for the 0xdead10cc exception code. 2016-09-02 Updated for iOS 10. Expanded the discussion of crash report symbolication. 2015-07-21 Updated for Xcode 6.

Expanded the discussion of crash reports. 2012-12-13 Added information about more exception codes. 2012-03-28 Added information about low memory crash reports and more exception codes. Updated for Xcode 4. 2011-03-01 Updated to reflect changes for iOS 4.0 and later. 2010-07-06 Fixed bug in the documentation. 2010-05-18 Updated to reflect changes for the iPhone OS 3.2 SDK and Xcode 3.2.2.

2009-06-01 Added stronger emphasis about the need to save not only.dSYM files, but application binaries as well. 2009-04-30 Updated for iTunes Connect crash log service. 2009-02-18 Updated to include a workaround for an issue that prevents application code from being symbolicated. 2009-01-29 New document that essential information for developers explaining how to symbolicate, understand, and interpret crash reports.